1 / 2
Sleeves to aid in closing up the body of the imperial version of the Hadley Telescope — zdjęcie 1
1 / 2

Sleeves to aid in closing up the body of the imperial version of the Hadley Telescope

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

It's a set of short cylinders

Ocena
0 / 5
Polubienia
1
Pobrania
10
Wydruki
0
Wyświetlenia
108
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

3 sleeves. The UTA interface has one side which meshes with the UTA. The LTA interface does the same. The "Basic Sleeve" will connect to both (albeit in opposite directions). You can print as many Basic Sleeves as you can fit.

To install, make sure you know which way it faces to lock into the next part, simply hold it vertically in the middle of all 3 bars and then rotate the right way. It will flex enough to pop into place. Then slide up and down as needed.