1 / 10
Lötabsaugung Klebeabsaugung Lötrauchabsaugung / Solder extraction / adhesive extraction Solder fume extraction — zdjęcie 1
1 / 10

Lötabsaugung Klebeabsaugung Lötrauchabsaugung / Solder extraction / adhesive extraction Solder fume extraction

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Lötabsaugung Hier eine kleine Lötabsaugung für ein oder zwei 120er Lüfter und für Aktivkohlefilter 130x130x10 (die…

Ocena
5 / 5
Polubienia
10
Pobrania
54
Wydruki
2
Wyświetlenia
977
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial

Lötabsaugung

Hier eine kleine Lötabsaugung für ein oder zwei 120er Lüfter und für Aktivkohlefilter 130x130x10 (die auch in den ZD-153 passen).

Außer den Druckteilen wied benörigt:

2x 120er Lüfter

1x Netzteil (passend für Lüfter)

8x Senkschraube M4x30

8x Mutter M4

1x Zylinderschraube M5x20 (oder25)

1x Mutter M5

1x Netzteilbuchse für Durchmesser 12

1x Kippschalter für Durchmesser 7

Ein paar Kabelstücke

Optional:

LED Band (Gleiche spannung wie Lüfter)

Einfach sas selbstklebende LED-Band oben an der Absaugung ankleben.


Solder suction

Here is a small soldering suction for one or two 120 fans and for activated carbon filters 130x130x10 (which also fit into the ZD-153).

Apart from the printing parts, you will also need:

2x 120 fan

1x power supply (suitable for fan)

8x countersunk screw M4x30

8x nut M4

1x screw M5x20 (or 25)

1x nut M5

1x power supply socket for diameter 12

1x toggle switch for diameter 7

A couple of pieces of cable

Optional:

LED tape (same voltage as fan)

Simply stick the self-adhesive LED tape on top of the suction.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

0,1 - 0,28

Infill:

35

Filament: you want you want you want

Category: 3D Printing

Tagi