DIY Stand alone Green strobe / Flashing light for drones - 1S whoop battery
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1S 300mah tiny whoop battery powered green strobe light for night flying with drones.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I've designed a stand alone Green strobe light for drones powered by a 300mah 1s battery commonly used with tiny whoops and attached to the battery strap of the drone.
This is a DIY Project, used to comply with EASA / UK regulations for night ops.
Features:
Very bright flashing Green Cob LED
(The COB LED is much brighter in person than it appears in the pictures.)
Stand alone - Powered by tiny whoop battery
Battery level indicator
Over discharge protection
Easy to remove/install - attach to drone battery strap
Hardware:
1x Menace Green Cob LED. (You don't need the cobDriver)
1x 1s 300mah Lipo
1x 1s BMS (Aliexpress)
1x Joyplanes stobe light controller (No longer available, alternatives on Aliexpress)
1x Female BT2.0 or PH2.0 connector
1x Battery level indicator (Aliexpress) - Optional
1x Small on/off switch (Aliexpress) - Optional
2x M2 screws
Support my work: All of my models are available for free. If you'd like to show your appreciation, consider Buying Me A Coffee.
Filament: PLA