Raspberry Pi Display Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple adapter allowing the Raspberry Pi Display to be mounted onto a monitor stand
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 106
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
The model for the Raspberry Pi Touch Display 2 impressed me so much that I decided not only to print it but also to modify it, extending its utility with an adapter designed to secure it to a standard monitor stand.
Print instructions:
Material: PETG
Layer: 0,2 mm
Perimeters: 2
Infill: 15%
Supports: Recommended
Brim: No
This model requires some special settings, more details in the attached 3MF file.
Part list:
Printed part [x1]
Bold M2,5x12 [x2] - Display attachment to the adapter
Bold M3x14 [x2] - Attachment to the monitor stand
Nuts M3 [x2]
Assembly instructions:
If you need to customize the model for your specific monitor stand, you can easily do so by modifying the "stand_dia" variable. The link can be found below.
Custom modification:
If you want to modify the model, I am attaching the STEP file and a link to my OnShape.
You can easily modify the model by changing the variables.
Current model version:
V02
Note:
Please don’t forget to leave a comment and rating. I truly appreciate any feedback – it helps me improve and address any potential shortcomings in the model. Thank you very much!