PS4 Slim Top cover/shell
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacment cover/shell for the ps4 slim
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 331
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a fully re-engineered replacement for the PlayStation 4 Slim top panel, specifically designed for those with standard 256x256mm build plates. While the original console part is 265mm wide, I have optimized this model to be printable and perfectly functional for the Bambu community.
What I’ve Improved:
Correct Fitment: Re-scaled the height to 8mm to ensure a flush, low-profile fit on the console.
Structural Optimization: Added a 5mm internal hollow with a reinforced 3mm top wall. This provides a perfect balance of strength, heat resistance, and material efficiency.
2-Plate Configuration: Pre-split into two parts and angled perfectly in the .3mf file to fit standard A1, P1S, and X1C beds.
High-Quality Settings: Configured at 0.12mm layer height with Tree (Slim) supports to ensure the best possible surface finish for a 3D-printed shell.
Assembly:
Once printed, simply remove the tree supports and bond the two halves with a small amount of super glue (Cyanoacrylate). For a professional matte look that matches the original PS4, I recommend using Matte PLA.
Credits:
Base geometry concept inspired by @Pv3Coca. This version has been fully hollowed, resized, and configured for production-ready printing by me.