Nerf Muzzle Brake — Short Aggressive Design, Standard Barrel Attachment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A short, aggressive muzzle brake for Nerf blasters with a standard barrel attachment point.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 67
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
A short, aggressive muzzle brake for foam blasters with a standard barrel attachment point. Pure cosmetic upgrade — snaps on, looks good, doesn't affect performance.
Lightweight and quick to print. Designed to give your blaster a more tactical, purposeful look without adding bulk.
What fits: 36mm inner diameter, standard foam blaster barrel attachment. Check your barrel outer diameter before printing.
Print Settings:
Material: PLA
Walls: 2-3
Infill: 15% — any pattern
Supports: No
Layer height: 0.2mm
Notes: Print in black for contrast against brightly colored blasters, but check your local laws before doing so. Some jurisdictions legally require toy blasters to have a brightly colored muzzle to distinguish them from real firearms. When in doubt, print in orange or another bright color. This is a purely cosmetic attachment — it does not modify airflow or dart performance in any way.