1 / 4
Sodastream DUO/E-DUO Dual Bottle Holder (Remix) — zdjęcie 1
1 / 4

Sodastream DUO/E-DUO Dual Bottle Holder (Remix)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a bottle holder with drip tray that fits two 1L glass or plastic Sodastream bottles

Ocena
0 / 5
Polubienia
5
Pobrania
20
Wydruki
0
Wyświetlenia
106
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Share Alike

Features

Compatibility: Designed specifically for Sodastream DUO and E-DUO 1-liter bottles.

Versatility: Fits both the glass carafes and the plastic (FUSE) bottles.

Decorative Rings: Includes four optional rings to cover the seams and add a professional finish.

Print Settings & Recommendations

Main Holder & Rings

Material: PLA 

Supports: None required

Assembly: I recommend using a small drop of superglue to secure the decorative rings in place. While they are optional, they help hide any minor print imperfections and give the model a cleaner look.

Drip Tray (The "Mesh" Look)

The tray in the photos was printed with a specific technique to create a mesh/honeycomb effect:

Material: TPU (recommended for grip) or PLA.

Top Layers: Set to 0.

Bottom Layers: Set to your preference (usually 3-4).

Infill: 10% Honeycomb (or any pattern you prefer).

Wall Loops: 2-3.

By removing the top layers, the infill pattern becomes visible and acts as a drainage grate.

Credit

Original design by Bogomir. This remix was created to double the capacity while maintaining the sleek aesthetic of the original model.