FlashForge 5M Pro Rear And Side Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spool Holder with or without Bearings that mount on the side of the FlashForge 5M Pro,
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 269
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Spool Holder with or without Bearings that mount on the side or rear of the FlashForge 5M Pro,
Please read the pdf in the files section for more information and links to both spool holders.
I'm going to design a filament guide mount in the near future that will attach to the mounts.
please let me know if you have questions or suggestions.
There are 2 sets of mounts.
One set of side mounts that fit the 5M Pro and the 5M Pro with lid riser.
One set of rear mounts that fit the 5M Pro and the 5M Pro with lid riser.
There are 2 spool holder options.
The spool holder with bearings adjusts to fit the filament spool.
The fixed spool holder does not require any bearings.