Fibaro Universal Sensor housing (FGBS-321)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a housing for the Fibaro FGBS-321 Universal sensor. I didn´t find any housing for it so I decided to design…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 260
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a housing for the Fibaro FGBS-321 Universal sensor. I didn´t find any housing for it so I decided to design this.
I use the sensor for temperature sensing so the opening at the bottom is the exact fit for one servo type plug and a JST, pressure fit. The space left over is great for the antenna to go through if needed.
I printed the housing as shown in the Slic3r screenshot, with a modifier so it would only be supported on the bottom overhangs. I have included my modifier block so you can use it. You can get more information about modifiers here: https://manual.slic3r.org/advanced/modifier-mesh
Category: Electronics