Camplet luggage rack enhancement

When we bought our used Camplet, it was immediately apparent that we need to enhance the load rack on it so we could utilize it better for our camping equipment. 

I went looking for some cheap but tough load bearning material, which I found in the IKEA Boaxel wall uprights. From there I designed a suitable mounting bracket, printed in TPU to allow it to slip over the already existing Camplet rack members.

Printing

I used a semi-rigid TPU type for this, but any TPU type material could be used. I leave it up to you how many outer layers and what type of infill to use, as it differs on the material you use. I do recommend keeping it stiff, rather than floppy/squishy. Remember, you are going to use this to connect to cross members that will ultimately bear some weight.

Assembling

Simply buy your required amount of Boaxel wall uprights, I bought 4x2 meter ones. I then dry fitted them to find out which mounting holes I could still utilize and which I would need to drill, as well as I had to shorten them a bit to get a good fit. 

Then it is just a matter of measuring them up and drilling the necessary holes. Drilling can be slightly difficult as the drill may catch on to the Boaxel material, so I recommend starting with a small drill and go bigger each time until you have reached your desired hole width. 

I used bolts with self-locking nuts to securely fasten the cross members.