Tainted Grail Location Card Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Location card holder for Tainted Grail.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 135
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of a model from thingiverse. The original model had loose fitting connectors and was for sleeved cards. This new model is much more snug fitting, but you do not have to snap it together. You are able to simply drop the new ones in place and they will connect with very little movement and no force needed. They are sized for unsleeved cards and have a small amount of space between the card and the sides so you aren't forcing the card into the holder at all.
If you want to used these for sleeved cards, increase the x and y dimensions by a few millimeters and adjust more if needed after a test print. I shrunk each side by 2mm from the original model which was for sleeved cards, which apparently fit Sleeve Kings brand sleeves.