FLAK Rival Inline - Metric
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Introduction
This is a somewhat simplified metric conversion for CptSlug's FLAK in Rival inline configuration. As most holes intended for 4-40 screws accept M3 screws, not all components were changed, thus, you need to print all original files except for those uploaded here. Switched some axles to M5 clevis pins for smoother operation, removed all locked-in-place standoff nuts.
Updated metric BOM:
4x M5x6 button head screws
4x M5 nuts
Plunger Tube (OD 50, ID 37, L ~102)
~35x M3x10 countersunk screws (depends on extras, in some cases may combine M3x8 with M3x12)
6x M3 Nyloc nuts
Barrel Tube (OD 25, ID 22, L ~127)
1x M5x50 clevis pin
1x M5x16 clevis pin
2x U2010x2 U-channels
1x 4mm bungee cord
1x 19x2,5mm O-ring (equivalent to AS568 116)
Assembly process is unchanged, however, it's easier to hold Nyloc nuts in place with some instrument.