1 / 2
15-105mm hollow hemispheres w/ ~2.5mm thick walls
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My hollow spheres are popular so I decided to work on other shapes as well.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 45
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (19)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (4)Powiązane
My hollow spheres are popular so I decided to work on other shapes as well. Basically made hemispheres in tinkercad going up in 5 mm increments then cut a hole inside with a hemisphere that was 5 mm smaller and centered inside. The size of the model indicates the dimensions of the base. Example the 40mm hemisphere has a 40mm diameter base. Height will be half of the base diameter.
