Tetrapod Wave Breaker/Erosion Defence - No supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Miniature tetrapod whole or in 4 pieces for easy printing.
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 394
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props & Terrains
- Licencja
- Creative Commons — Attribution — Share Alike
For some reason I've wanted one of these in concrete and I might design my own mould for them - part of that process involves modelling a tetrapod and I got a bit sidetracked(I haven't even begun the mould model) making them interlock together.
I've seen other models of tetrapods on here that print as one peice with no supports but I can't imagine that'll work with this particular model as I got the design sizes from real tetrapods(109deg for one of the legs for some reason). The full tetrapod model is there if you wanna try though.
Make sure your bed adhesion is good for the 4mm models, I had to use a brim.