Basic Enclosure for RSP-1000
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a basic enclosure for a Meanwell RSP-1000. Basic surround without restricting airflow.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Share Alike
Basic Enclosure for a Meanwell RSP-1000. As shown, the two main sections were printed in PETG, the handle and the strain relief are TPU. The handle could be printed in anything; the strain relief must be flexible to be functional. Use your own judgment as to the effectiveness of this enclosure; you are responsible for all wiring and use of this. I am not including any wiring instructions or advice. Quantity 8 M4 screws will be used to attach the enclosure to the power supply. 8mm long should be appropriate for all 8.