1 / 4
Collar for the TM101 holder to fit Universal drill press.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a collar that can fit round this model to fit the Universal drill press (42mm).
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have a Universal drill press and needed to be able to use it with my TM101 to do thread inserts into 3D prints. If slightly loose just use a layer of masking tape to make a tight fit. It was easier than it being too big and needing sanding down, affecting the outer strength.
By making this as a collar it meant that they could fit together or be slipped apart, depending on what press was available.