1 / 23
Super Flexi Snake - 6mm + 8mm glass eye compatible — zdjęcie 1
1 / 23

Super Flexi Snake - 6mm + 8mm glass eye compatible

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The Flexi snake by FlexiMania combined with the Super Flexi Dachshund and compatible with 6mm and 8mm glass eyes. :)

Ocena
0 / 5
Polubienia
8
Pobrania
60
Wydruki
0
Wyświetlenia
225
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The Flexi snake by FlexiMania combined with the Super Flexi Dachshund by Martin Rigatoni and compatible with 6mm and 8mm glass eyes. :)

Four variations are provided. A short and long version for 6mm and 8mm glass eyes. Files are named accordingly. I printed the 8mm long and 6mm short versions.

WARNING: Please trust me when I tell you that stringing is going to be your worst enemy when attempting to print this. Please make sure your filament is dry as well as calibrated for your machine. The smaller versions are more difficult to print. Make sure you are using Arachne wall generator when you print it.

I definitely highly recommend printing the 8mm long version.

No supports are required. A brim should definitely not be used either, it will most likely ruin the print. I printed it at 0.16mm layer height with 8% gyroid infill.

Happy printing :) 

Feeling generous enough to buy me a coffee? Or join my membership to get 3 converted STLs per month. :) - https://buymeacoffee.com/B3ND

Affiliate links for glass eyes.

Aliexpress
https://s.click.aliexpress.com/e/_c3fHmdwH

Amazon

https://amzn.to/4sKbrO0

https://amzn.to/3YATeVl

Filament used: Gradient macaron.

https://amzn.to/48rJTo6

My printer: Elegoo Centauri Carbon
Affiliate link - https://amzn.to/4qfU9Xj

Tagi