fully printed basic glider
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Desk decor or outdoor toy. Not a pro flyer, but an ideal test of 3D printer precision with ultra-thin layer adhesion.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution
This model is a fully 3D-printed glider that serves as a fun outdoor toy, a sleek desktop decorative, and a challenging 3D printer test. The very thin wings require high precision and excellent layer adhesion to print successfully. While the glider is flight-capable, it must be tossed correctly and requires enough space to glide properly. When not in use, its minimalist design makes it an excellent decorative piece.
Printing Precautions
Layer Height: Ensure your first layer height is set below 0.1mm (0.08mm is recommended) to handle the thin wing profile.
Stringing: If stringing occurs, try reducing your first-layer line width (the exact amount depends on your specific printer).
Part Removal: It is highly recommended to place the print bed in the fridge for a few minutes before removing the parts to avoid damaging the delicate wings.
Assembly
The final prints should be connected to each other using glue for a secure and permanent bond.
I’d love to see your results! If you manage to print these thin wings, please Post a Make and share your printer settings to help others calibrate theirs.