1 / 3
Prusa heatbed cover for thick wire with M3 heat set inserts
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
M3 heat set inserts instead of hex nuts in the cover
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 440
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (15)Powiązane
Modification to allow for thick wires on the Prusa Heated Bed made by InnovationWorkstation with M3 heat set inserts on the cover.
The Body model without changes.
Fasteners:
- M3x10 SHCS - 2pcs
- M3x12 SHCS - 1pcs
- heat set inserts M3x5x4 - 2pcs (https://aliexpress.ru/item/4000232858343.html)
I printed this model with glassfilled ABS GF-4 by Filamentarno on Original Prusa textured sheet.
UPD 19.08.2023 rev2: Fix the holes dimentions. Now the holes diameter 4.7mm instead of 4.6mm