flatcan - a tiny kitchentrashcan that uses dogpoopbags

This is Flatcan.

Flatcan is a small Kitchen-Trashcan that utilizes the standard size dogpoop-bags.
It is meant for your typical kitchenwaste that you find prepping your family meal, as
that is often way too much for any classic 5L trashbag.
Also the dogpoop-bags are super cheap.

Flatcan can be put on your counter, or just hang into the first drawer so you can simply
scrape the cuts/trash directly from your countertop into this trashcan.

The Flatcan-Lid can be opened up from the front, but doesnt stay open in this, so you can just
open it with the back of your hand, throw something in, pull your hand away and it closes again.
The other mode is pulling the lid up and to the front so it stays fully open; also the mode
you would normally put it onto your drawer.

Flatcan comes in 3 flavours:
- a fully massive 4mm thick bottom container
- a 2.5mm thin bottom container
- or only legs that help the stability of your trashcan against the drawer, but the
actual bag hangs freely. This one then of course doesnt stand freely on your counter.

You have all 3 in the standard 3mf, just delete the ones you dont want.

Flatcan is called “flat”, because your standard dogpoop-bag is between 230 and 300mm high, the inside of the two
bottom parts only allows for roughly ~170mm of height. This was done so it a) looks nicer on the counter and b) because
it looks nice on the counter. ;)

Material List:
- you do need M3 Threaded Inserts, best are 4mm long ones, 3 or 5mm also work though
- 6x M3x8 screws
- 4x M3x6 screws
- for the hinge on the lid i would add a drop of threadlocker like loctite 243 to the 4 screws there.
It will work without it, but be sure to check if your screws are still there from time to time.