Fox Proframe / Proframe RS Chin Mount (GoPro/Action Cam)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounts to the bottom of the chin bar on a Fox Proframe fullface helmet.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 188
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update: Added version with wider base. NOTE: Also improved tolerances on version with wider base. Narrow does not have the larger tolerances.
Also fits the Proframe RS! the angle isn't 100% spot on but more than close enough to work just fine 🎉
GoPro chin mount to attach to a Fox Proframe helmet, uses 2x zipties to secure. I recommend putting a bit of plastic between the zipties and foam on the back side of the chinbar, otherwise they compress into the foam a bit.
Printing 100% infill recommended with 0.4mm or smaller nozzle. I now print them in 95a TPU and they're pretty much indestructible, but PLA/PETG/Nylon/etc would all be fine too.
This other design on Printables is also my design - they reuploaded my older Cults model (have since changed the thumbnail over there). Have also since swapped the sides the thumbscrew goes in to allow easier access to the battery door catch.