SuckMate (vacuum Hose boom arm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vacuum Hose Arm / Boom Arm
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 232
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed my own Printable arm (Inspired from the Festool Boom Arm )
to have your "sucker" all the time at the correct place without throwing everything from your table.
Its designed to hold an 40mm Hose (or smaller) maybe bit bigger would work as well.
you need to have a 19-20mm rod to place the Arm mount on it.
I printed the Arm mod with the lower flat base on the Printbed and used a Brim (don't know if really needed)
The Arm Parts are best to print flat on the Bed
I used PETG for the whole system. and there are some Supports needed
it's kind of important to use the Cableclip after you installed the Arms and putted the Hose inside. -> They give some strength to the design (Holding them together)
the Inserts are to use if you need bit less curve in the Arm. just place them from the bottom between two Arm parts (they should clipin"
Hope that thing is working at your place like it does at mine !
cheers and have fun