Wall mount for accessory boxes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder to fix boxes for small parts (screws, washers, electronic parts) to the wall
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Usually it is the small parts that are helpful. I have a large set of small parts, like screws and electronic parts in sorter boxes (see one of the pictures of this wall. Recently, when moving, I needed to fix these boxes to the wall. Instead of going to the hardware store I simple designed necessary wall mounts myself. Maybe they are not directly usuable for you, but could give you an idea, I provided the - simple - OpenScad file to adjust them.
Printing is no problem, use PLA, ABS whatever, Infill was 15% in my case, but not really critical. These holders do not need to fix heavy loads. For safety, I used a washer to prevent a screw from damaging the plastic holder; see last picture how I used them on top of the stack.