Fragile looking Wind Chimes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I tried to make this really tiny and delicate design for this hanging decoration.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 250
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Share Alike
First of all, the default size is really small, and assembly can be infuriating. If you care about that, feel free to upscale to 150% or even 200%; the model will still work.
There are three pipe sizes to be used. As seen in the photos, using different sizes can be harder to balance. Using pipes of the same size will solve this while keeping the look.
Customisable. Use different pipe sizes and chain lengths for a different final look. Chains may be a bit difficult to assemble, but a string of matching size will do fine as well.
I highly recommend using PETG for printing. Mainly, the chain is designed to bend to allow assembly; less elastic materials might not work well. Other parts can be printed with PLA and work just fine.