SpoolSense Dock Standalone Scanner Case (ESP32 + PN5180+ 16x2 I2C LCD + RGB LED) for CerealBox Kichly, Skroam
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A dock for the SpoolSense RFID scanner and manager in conjuction with Spoolman or stand alone with multiple NFC-tags
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is still work in progress.
I make this for my Prusa XL as a dock for my DryBoxes supporting the RFID reader from the Project SpoolSense.org
This enclosure is part of the SpoolSense ecosystem – an open-source project for tracking filament spools using NFC.
Full project, firmware, and general wiring guide: https://spoolsense.org
For build information for this scanner, please see here: https://github.com/SpoolSense/spoolsense_scanner/tree/main/usermods/plasticsnake
What is ready, what is planned:
modular for easy printig ( 3 parts for the base) also printable on smaller printers
nicer surface through printing upside down and bolting together ... selftapping
no support needed reducing time and wasted material
colors corresponding to the Prusa CI
screwing together with normal M3 Allen screws selftapping
backpart of the dock is interchangeable for future changes (keypad, LCD, TFT, Buttons ...) so the front part can stay "as is" with the NFCReader and the ESP32DevKitC1
powerconnection in the front with ellbow cables
this is the stand alone version at the moment
connection to the frame of the XL
for the 5 toolhead version ... 3 on the left and 2 on the right ...
Thanks to stewe @stewe_208669 for this dummy