Case For Minisforum MS-R1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement case
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 141
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Standard Digital File License
🟩 🟦 🟦 🟪 🟥 🟧 🟨
This is a replacement case for the Minisforum MS-R1, and for me at least it is a pit-stop on the way to another model for this device.
The latch works when the model is inserted properly. The model is thicker than the normal case with more walls and infill to ensure it is stiff enough for the latch to work.
Once all the parts are printed the button should be inserted free into its hole in the bottom of the case, and the computer slid in vertically so it remains in place. The button should fit perfectly with more or less no wobble.
Consider this may get hot, and you don't want plastic melting into it and catching fire and use an appropriate plastic.
When printing this the support for the latch is a bit of a liability, however it has just about managed to function twice so far. If you can make this work better, great!
If you like my designs or find them useful it would be great if you can support me by joining my club on Printables for at least a month, which gives you access to various extra models for the duration of membership. Another alternative is to buy me a coffee over at ko-fi via this link. Thank you!
🟩 🟦 🟦 🟪 🟥 🟧 🟨