My own Star Trek Ship TOS1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Its a Star Trek Ship inspired by the original series (TOS) with Kirk. The design is my own one.
- Ocena
- 0 / 5
- Polubienia
- 47
- Pobrania
- 205
- Wydruki
- 0
- Wyświetlenia
- 1869
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It's a Star Trek Ship inspired by the original series (TOS). The design is my own one.
The model is split into several parts that can be printed in different colors. If you use the color-change method you can add more detail to the model. (The idea was, that you do not need to paint the model at all)
Some parts need to be printed more than once, you can see this in the pictures like e.g. the Live-Pods (rescue pods).
I split many parts, so that they have a flat surface to be better printable.
Between the top and lower wings I added two braces to stabilize this part of the model. Originally this was not part of the design, but I am really unsure if it is stable enough without them. Please refer to the pictures to decide if you need them.
I finished the design now but was not able to print it till now. So please try it.
I hope it will do fine. Parts should fit with around 0,2mm of spacing (no press-fit) so that there is enough space for glue.
The design was made in Onshape and is publicly available there, so if you want to change something, feel free.