Glencairn Holder (Multiple Sizes)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Glen Cairn Holder for those who are tired of these taking up cabinet space.Multiple Sizes/Formats for mounting.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Open Community License v1
A friend was consistently breaking his whiskey glasses in his cabinet ( from them falling). I whipped these together for him and to share.
There are 3 styles of mounting: Recessed hole for a round m4 screw, a hole for a flat m4 wood screw, or one with no holes for double sided tape.
There are 4 different lengths: 70mm~ (for 1 glass), 140mm~ (for 2 glasses), 210mm~ (for 3 glasses), 270mm (for 4 glasses).
Included is a test sample that is only 4mm thick so you can test it (resize it) and not have to print a whole thing.
All of them (except the sample) has a backplate so the glasses won't fall out the back when loading to store glasses.
You can print flat or straight up with the flat side down. If you print flat you may need supports or you could try printing inside to out on the walls. Same with the sample. Printed 2 of the 4 glass holder @ .2 layer height, 3 walls, 15% infill.