1 / 3
Tr8x2 Leadscrew Cleaner; 8mm OD 2mm Pitch 1 start
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cleaning tool for Tr8x2, 8mm diameter 2mm pitch 1 start leadscrews Note these are different from the one on your printer
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 77
- Wydruki
- 1
- Wyświetlenia
- 270
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (0)Kolekcje (22)Powiązane
A cleaning tool for Tr8x2, 8mm diameter 2mm pitch 1 start leadscrews.
Note that these are not the same as the ones usually on 3D Printers, which are 2mm pitch 4 start.
Printed mine out of PLA, 2walls, 15% gyroid infill, 0.2mm layer height, no supports.
Edit May 14, 2026:
Added a variant (Type B) with new flexures that should stress and permanently deform less.