1 / 3
Atlas 1060 Drill Press Bearing / Bushing Sleeve Insert Part — zdjęcie 1
1 / 3

Atlas 1060 Drill Press Bearing / Bushing Sleeve Insert Part

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Splined insert part that sits on top of a bearing on the crank handle(?) for an Atlas Drillpress

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
29
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v2.0

Atlas 1060 Drill Press Splined Drive Sleeve

If you've got an old Atlas 15" drill press (1060 and friends) and the splined sleeve inside the pulley cracked in half, here's the thingy. The original is nylon and just gives up eventually. No sense letting this drill press die when it will clearly outlive us all with some love.

Print it in something tough (PETG, nylon, PC) with lots of walls and high infill. PLA will not survive. (I did GF PETG)

Two versions in the files: the standard one, and a shorter version. My dad ended up sanding his down a bit to get it to fit right, so I just made a shorter one to save everyone the sandpaper. Try the standard first, go shorter if it's stuck on the bearing.

Did the modeling totally remote based off pictures and rough caliper measurements and apparently it works nicely according to the prints I sent my dad.

Tagi