GT-Style Shifter Paddles for Simracing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shifter Paddles for Simracing Mounting holes for M3 screws - 10mm distace
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Share Alike
Upgrade your sim racing rig with these ergonomic, lightweight shifter paddles. Designed with a curved profile for a comfortable reach and a six-hole "lightening" pattern, these paddles offer a satisfying tactile response and a high-end GT3 look.
Universal Mounting: Features a standard 2-hole mounting pattern for M3 screws, distance between the holes is 10mm (compatible with most DIY magnetic shifter units).
Compatible with my Magnetic Paddle Shifters:
* **Textured Surface:** If printed on a PEI sheet, the face provides a great grip even during intense endurance stints.
Recommended Print Settings
To ensure these paddles don't flex during a heated battle on the track, I recommend the following:
Material: PETG, ASA, or PLA+ (Regular PLA works, but can be too brittle and may break over time).
Infill: 25% - 40% (Cubic or Gyroid for good stiffness).
Wall Count:** standard 2 will do, you can increase to 4–6 walls for structural rigidity.
Layer Height:* 0.2mm for a good balance of strength and finish.
Orientation: Print flat on the build plate for maximum strength across the length of the paddle.
Hardware Required
2x M3 Bolts and Nuts (depending on your shifter base).
Happy racing!
If you enjoy the design, please post a make—I’d love to see these on your setup.