1 / 5
Shimano SPD-SL Road Pedal to Flat Pedal Adapter — zdjęcie 1
1 / 5

Shimano SPD-SL Road Pedal to Flat Pedal Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

'Flatz' is a 3D-printable snap-in flat pedal adapter designed for Shimano SPD-SL road pedals, allowing riders to use…

Ocena
3,333 / 5
Polubienia
15
Pobrania
100
Wydruki
1
Wyświetlenia
605
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Share Alike

'Flatz' is a 3D-printable snap-in flat pedal adapter designed for Shimano SPD-SL road pedals, allowing riders to use regular footwear without carrying an extra pair of cycling shoes.

The adapter clips directly into the pedal using the standard SPD-SL cleat retention mechanism, converting the road pedal into a practical flat/platform for short commutes, grocery runs, café stops, and casual riding.

This design features an optimized high-grip ridge pattern engineered specifically for sneaker soles, improving traction and foot stability while maintaining a lightweight, low-profile form factor. The platform geometry has been iteratively refined for improved comfort, load distribution, and lateral grip.

Same STL File is intended for both Left and Right Pedals.

Features: • Snap-in SPD-SL (PD-R550 & PD-RS500) compatible mounting interface - Compatible with Tiagra, 105, Ultegra and Dura-Ace Pedals • Sneaker-optimized grip ridge geometry • Lightweight and durable printable construction • Fully printable with standard FDM printers, with pre-modelled supports for overhangs!

Designed for convenience, utility, and everyday versatility, I hope this bridges the gap between performance road pedals and casual everyday riding!

NOTE: This is a Work-In-Progress, Any Suggestion/Reviews are HUGELY APPRECIATED. I one day plan to start selling a FINALIZED & REFINED version as an actual product, for cyclists & commuters who do not have access to a 3D-Printer.

Feel free to remix and share ;D !

Print Settings

Printer Brand: Anycubic

Printer: Kobra 2 Neo

Rafts: No

Supports: No (Pre-Modelled Supports in the STL File)

Resolution:0.2mm Layer Height

Infill:15-25% Grid or Cubic Infill | 3-4 Walls

Filament Material: PLA

Notes: 
1) Don't turn on supports, as the overhangs & bridges are supported by pre-modelled supports, which can be easily removed.
2) Use PLA or PET-G.

Post-Printing

-> Sample 3D Prints of the Pedal Adapters

-> Post-Printing Instructions

-> Quick Overview of the Design

Category: 3D Printing

Tagi