GT2 Belt Tension Meter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
GT2 Belt Tension Meter with strain gauge sensor
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 25
- Wydruki
- 1
- Wyświetlenia
- 337
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For printers with CoreXY kinematics it is important to tension the belts equally. A tension tester with a strain gauge sensor allows this to be done. This is the second version of the tester, simplified and improved: the cylindrical belt stops have been replaced with flat ones, eliminating the need to shift the sensor to match the stops with the belt teeth, which increases its accuracy and ease of use.
Recommended to print in ASA or ABS. Layer height: 0.12 mm, infill: 100%
Use the manual seam drawing function in Orca Slicer so that on the belt stop it does not end up in the place where it will contact the belt