Pizza Jigsaw Puzzles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two fun jigsaw puzzles sculpted to look like pizzas! Available for small printers (200mm) and large printers (300mm).
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 125
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The color changes can be achieved on a single color printer by swapping filaments at key layers.
Each puzzle (large and small) is made of two pieces using the negative volume feature of slicers. When you overlap two meshes and set one to be a negative volume, the volume of the second is cut away from the first mesh just as if you performed a boolean cut in Fusion of Blender. The advantages of this technique are that this doesn't crash the software, take hours to process or generate meshes filled with errors. To print it, load the puzzle and cutter into your slicer and apply the cutter as a negative volume. If you use PrusaSlicer, you can just use my project files.
Print Settings
Perimeters: 1
Perimeter Generator: Arachne (eliminates gaps in the top layers)
Seams: Random (This also makes the pieces separate a lot easier)
Bottom Layers: 2
Top Layers: 4
Infill: 10% Rectilinear
Top Infill Pattern: Concentric
Brim: I used a brim for the 200mm puzzle, but not the 300mm puzzle