1 / 1
Remix: SL_ST Cyclone Second Stage Mod (111.75% Scale)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Increased airflow by stretching second stage intake height by 250%, combined with inner cone to be printed in one piece.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 98
- Wydruki
- 0
- Wyświetlenia
- 364
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v3.0
WARNING: This model fits 111.75% Scale Up model of the SL_ST Cyclone. (I scaled up the original because my vacuum hose diameter fitting is 44.7mm rather than the 40mm.) So if you printed the SL_ST at its original scale, you would need to uniformly scale this back down by 89.485%. [111.75/100=0.8948545861] (update: or download the “SECOND SWIRL INTAKE TALL 100_SCALE-00_01.STL” instead)Comment by https://www.printables.com/@shentatsai_3159637 on https://www.printables.com/make/2756746
Per suggestion "most of the suction lose was due to the limitation on the SECOND SWIRL INTAKE-01 part"
Modded the design and increased airflow by making the vane portion taller by 250%