Carmel Mission Project
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Carmel Mission project using custom designs to be compatible with Lego bricks.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Historical Context
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This collection contains the custom parts needed to replicate the Carmel Mission built using a Lego compatible brick design.
The bricks were custom sized to work perfectly on original Lego bricks as printed from my 3d printer. I didn't have great success using the online brick generator tools as they printed just a bit too large to snugly fit. You may have the opposite problem when printing these.
Most parts are direct print and use, however the wooden cross for the smaller main tower needs to be resized, and the same cross was re-used for the Cemetary on the side.
The fountain was glued to a pair of 1x 2 smooth top base plate bricks.
Anything that you see in the photos that is not contained in the models attached is a commercial Lego product.