1 / 2
car wheel tree holder plate (Standard Felgenbaum 35mm) — zdjęcie 1
1 / 2

car wheel tree holder plate (Standard Felgenbaum 35mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

During wheel-change one of my wheel-tree-holder plates broke - so I quickly designed and printed one.

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
26
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Public Domain

There is not much to say about it - used this as a spare part for my standard wheel-tree where one plate broke during unsafety wheel lay down ;-) (wheel-tree is kind of very old)

The diameter of the wheel-tree-shaft is 35mm and the locking-pin is close to 10mm.

Seems to work fine - no long time info yet!

Printed in standard PETG (didn't want to use any of my fancy PCABS, Kevlar-Bonds or anything like that)
but used a 0.8 nozzle to get a quick and durable print.

I am not the material-saver - like to be on the safety side.

For any changes just use the freecad file and slim it down

Tagi