1 / 12
MK3S+ Y motor pulley reverse system and belt tensioner — zdjęcie 1
1 / 12

MK3S+ Y motor pulley reverse system and belt tensioner

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Based on some existing designs i prepared a version of Y motor bracket and belt tensioner, with swapped pulley.

Ocena
0 / 5
Polubienia
16
Pobrania
57
Wydruki
1
Wyświetlenia
985
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

To turn the pulley on the y motor 180° (bring the force closer to the motor like on the X-axis) i created this custom bracket (with some other improvements, compare to the stock bracket). 

To guarantee the clearance please use the custom belt tensioner or the modified Prusa tensioner. 

The Belt bracket is designed to match the perfect path of idler and pulley and follows the original path. The negativ shape of GT2 belt ist designed with an offset in each direction. If your printer is well adjusted, the assembly should be free of frustration.  

There are some similar designs available, but my design is not a remix. So if you have any questions or suggestions, please let me know. 
 

After the first test, everything seams fine. Use the prusa pliers or similar to push the belt carefully into the slot, it is quiet tight but fits perfect. I would suggest to use the belt Bracket without cover, screws and nuts to reduce the moved weight…

 

 

Tagi