6x9in Notebook Holder with Reversible Pen Cup
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount holder for 6x9 inch notebook, with optional pen holder. Attaches via command strips.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wall mount holder for 6x9 inch notebooks. This is intended to attach to the wall with standard size command strips and includes cutouts so that the command strips can be removed easily. There is also an optional pen holder that can be attached to either side via keyhole pegs. The tolerances for these pegs are intentionally tight so that the pen holder attaches securely. This worked for me when printed in PLA Basic on my P2S, but it may require some additional finishing if the pen holder doesn't slide into place.