1 / 1
Metric 1 2 3 Machinist Block mixed sizes w/ holes — zdjęcie 1

Metric 1 2 3 Machinist Block mixed sizes w/ holes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I thought it would be nice to have a metric version of these. I started with a 10x20x30mm version and scaled things up.

Ocena
0 / 5
Polubienia
3
Pobrania
19
Wydruki
0
Wyświetlenia
86
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

I thought it would be nice to have a metric version of these. I started with a 10x20x30mm version and scaled things up. They follow the 1x 2x 3x ratio for the side dimensions. Hole diameter is half of the width of the smallest size. For better dimensional accuracy make sure your e-steps are calibrated. Also you could scale this up very slightly and sand it down for greater accuracy. May not be as good as the real thing but for casual tasks should be good enough.