Perky-Pet's Squirrel-Be-Gone 334-1SR Replacement Mouth
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement mouth piece for Perky-Pet's Squirrel-Be-Gone (Model 334-1SR).
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The original (which at times were near $50) wear out within a couple years.
This model replaces these worn parts. Disassembly is easy with 4 screws, the original will pop right out and these can bend into place without much effort.
I modeled these after having frustration with the other existing model online. Benefits over the prior model
It didn't consider the curvature of the feeder and was slotted into place by bending it into shape whereas this model is designed around it.
There should be no need for supports with this model, which can be a sticking point in TPU prints.
The angling should encourage the feed to get stuck less
I printed these with 1.2mm walls, top, and bottom and with no infill. I used a 0.6mm nozzles. No particular reason for these settings, but having the inside gaps may help with ease for insertion.
Feel free to reach out to me if anything is needed.