Slot Machine - Packing puzzle by Stewart Coffin (STC #185)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pack seven pieces into an obstructed 3x3x3 box.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 162
- Wydruki
- 3
- Wyświetlenia
- 1065
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Slot Machine
Packing puzzle by Stewart Coffin (STC #185)
Pack seven pieces into an obstructed 3x3x3 box.
Slot Machine looks like an innocent little packing puzzle, but it is far more challenging than it appears! The pieces must be maneuvered in a carefully choreographed sequence through a tiny 1x2 opening. Just figuring out where they're supposed to go is no easy feat, and that's only half the battle... you will need careful deductive reasoning and a lot of patience to solve this one.
The top of the box is modeled with a semi-transparent thatched pattern, so that you can more easily see what's happening inside. The pattern is purely aesthetic and is not relevant to the puzzle itself.
Printing Instructions
Print one copy each of coffin.slot-machine.pieces.stl and coffin.slot-machine.box.stl. After printing, you will first need to assemble the box, before attempting to solve the puzzle. The box cap has four glue holes, one in each corner, and the box frame has four pegs that fit into the glue holes. Put a drop of super glue into each glue hole, mount the cap securely onto the box, and wait for the glue to dry. Then you're ready to attempt the puzzle!
The Printable Puzzle Project
The Printable Puzzle Project aims to make available high-quality open-source models of many puzzle designs. All of our models are posted with the generous permission of their designers and are licensed for non-commercial use only. Anyone may print copies for their own personal use, but selling or otherwise monetizing them is not permitted, and puzzle designers retain all rights as copyright holders of their work.
Our puzzles are modeled using the open-source puzzlecad library. The .scad file is included with this model in case you want to modify any of its design parameters; more information on how to do this can be found in the PPP Puzzle Modeling tutorial.
About the Designer
Stewart Coffin has been called "the most outstanding designer and maker of interlocking puzzles that the world has ever seen". He is credited with over four hundred designs, has pioneered numerous ingenious puzzle forms, and has written extensively about puzzle design and craftsmanship. More information on Coffin, along with many other printable models of his designs, can be found on the Stewart Coffin Puzzles overview page.
Happy puzzling!