Organizacion cajones rejillas + cajas - drawer organisation grid + boxes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
set de rejillas de 40x40mm + cajas descarga el pdf del configurador. Download the pdf of the configurator.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 135
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Set de rejillas de 40x40mm + cajas de 45mm de alto para organización de cajones
En descargas encontraras el pdf con el enlace al configurador.
En el configurador de onshape tambien hay version con porta etiquetas y otras medidas de cajas y rejillas.
En la configuracion podras determinar la latura de las cajas, la altura cuenta la de la rejilla por lo que una caja de 40mm subira 35mm desde la rejilla, esos 5mm quedan dentro de la rejilla o de las cajas inferiores ya que las puedes apilar
podras introducir la medida de tu cajon y hacer crecer la rejilla hasta rellenarlo para ver el tamaño maximo,
Tambien generara unos espaciadores para las esquinas traseras del cajon.
Necesitaras una cuenta de OnShape para poder exportar las piezas generadas (hay una version gratuita para uso no comercial) https://www.onshape.com/en/products/free
Set of 40x40mm grids + 45mm high boxes for drawer organisation
In downloads you will find the pdf with the link to the configurator.
In the onshape configurator there is also a version with label holder and other measures of boxes and grids. In the configuration you can determine the size of the boxes, the height counts that of the grid so a 40mm box will go up 35mm from the grid, those 5mm are inside the grid or the lower boxes since you can stack them
You can enter the size of your drawer and grow the grid until you fill it to see the maximum size,
it will also generate some spacers for the rear corners of the drawer.
You will need an OnShape account to be able to export the generated parts (there is a free version for non-commercial use) https://www.onshape.com/en/products/free