Audi A4 B6/B7 Door Panel Clip - Improved 5-Part Assembly
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement for the door upholstery clips found in Audi A4 B6/B7 and Seat Exeo.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 162
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a 3D-printable replacement for the door upholstery clips found in Audi A4 B6/B7 and Seat Exeo (OEM Part Number: 8E0868243).
Unlike the original injection-molded part, this model is designed as a 5-element assembly. This approach allows for better print orientation, ensuring maximum strength and flexibility where it's needed most, preventing the common issue of the "head" snapping off during installation.
Key features:
Perfect Fit: Matches the dimensions of the original 8E0868243 clips.
Stronger Design: 5-part assembly optimized for FDM printing.
Easy Print: No complex supports needed if oriented correctly.
Tested on: Audi A4 B7 door cards.
Recommended Print Settings:
Material: PETG or ASA (avoid PLA as it's too brittle and might deform in a hot car).
Infill: 15% (for small structural parts).
Perimeters: max (e.g. 30)
Assembly Instructions
The clip features a unique Twist-Lock system for maximum durability. To assemble:
Slide each of the five discs onto the main stem one by one to their designated height positions.
Once in place, rotate each disc by 90 degrees to lock it securely onto the stem.
Important for Installation: When sliding the assembled clip into the door panel bracket, ensure you insert it using the narrower side (4mm) to ensure a proper fit.