1 / 1
Modern Wind Chimes ( Snap-Fit & Ball-Joint Free-Swivelling ) — zdjęcie 1

Modern Wind Chimes ( Snap-Fit & Ball-Joint Free-Swivelling )

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Some Modern style wind chimes, only needs string or other material to hang !! The rest is snap-fit and ball-joint !!

Ocena
0 / 5
Polubienia
4
Pobrania
11
Wydruki
0
Wyświetlenia
96
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

An all 3d printable wind chime, it swivels with snap-in ball joints !! The Resonant Tubes then snap fit together as well !!

Suggest to use PETG for more outside usage and better durability, also creates better resonance with the tubes.  You can still print in PLA !!

Infill: 15% is good for base and tubes
          100% for pendulum/ball-joint 

Infill Type: Top bottom layers ~ Concentric, Internal ~ Grid/Monotonic

No supports needed !!!

Tube Sizes Range from 100mm-55mm .. Change size if want bigger tubes !!

THIS WILL TAKE SOME HOURS - A DAY TO PRINT !!!

Re-orientate the middle pendulum ( gong like one ) 

Tagi