Parrot perch 100mm and 200mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Give your feathered friend a stylish place to hang out! This is a 3D-printed bird perch. Tested on PLA For PRIVATE USE
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Print this in my layout with my supports or create automatic ones in the slicer.
Layer height 0.16 mm
Material: PLA or PETG for your supports 0.3-0.4 mm
Support: 0.25mm
WARNING: "Always supervise your pet when playing with 3D printed toys. Regularly check for any signs of wear or chewing and discard the toy, if it becomes damaged also print a new one after 2 months as harmful bacteria will breed."
PETG is safer for your parrot but it does not bond well between layers, so print at higher temperatures for better bonding and test it at a lower height to avoid injuring your parrot.
This license is for PERSONAL USE ONLY. By downloading this file, you agree to the following terms:
ALLOWED: Printing an unlimited number of copies for personal use or as gifts for friends and family.
PROHIBITED: Selling physical 3D prints (printed copies) on any platform (Etsy, eBay, local markets, etc.).
PROHIBITED: Selling, sharing, or distributing the digital files (STL, 3MF) to any third party.
PROHIBITED: Modifying the model and reselling it as your own design.
To obtain a Commercial License (right to sell prints), please visit my Patreon
Patreon (Commercial License): https://www.patreon.com/c/SavAn3D
Ko-fi (Support/Tips): https://ko-fi.com/savan3d
Cults 3D Profile: https://cults3d.com/@SavAn3D