INDX Spool mount and filament quide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple way to mount 8 spools and quide the PTFE-tubes to the top while almost keeping the wide of the printer.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 386
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Finally the INDX system seems to be the so fare best way for multimaterial printing.
But I do not like the way the spools are mounted as I do not have very much room around my Core one in wide. There are always things stored on the left and the right which I have to remove before using the printer. So I made my own mounting for the spools which needs only about 2cm of room in wide.
I (of course) did not test it yet, but I think it should work. So please do not expect it to be perfect ;-)
In addition one needs some magnets for the bowden quide ( 12 magents 15 x 5 x 2mm) and some countersunk screws to mount all the parts.