Hyundai Ioniq5 License Plate Adapter (USA)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adapter shifts the location of the rear license plate on the 2025 Hyundai Ioniq5. The design is for a USA…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This adapter shifts the location of the rear license plate on the 2025 Hyundai Ioniq5. The design is for a USA standard license plate (California in this case). This is a cosmetic shift to allow the bottom of the license plate to better align with the rear hatch mold line. This adapter shifts the plate approximately 30mm up in relation to the original mounting holes. The thickness allows for clearance of the lower rear camera and is angled to bring the plate close to the bumper on bottom.
The design is minimalistic and meant to re-use the original license plate bolts with minimal additional hardware needed (2x M5x12mm bolt with washer, lock washer, and nut).
The .3mf is optimized for a lightweight fast print with overall low strength and infill but the addition of modifier cubes to up the walls and infill for the load bearing mount areas.
Print Settings
Rafts:
No
Supports:
No
Filament Material:
PETG
Notes:
Recommend printing in a UV resistant outdoor type filament such as ASA or PETG.
Post-Printing
Ensure Hole Clearance
Ensure all holes are clear and bolts / nuts easily slide in

2x M5 nut location
Add Captive Nuts
Slide M5 nuts into captive locations
Install adapter onto vehicle
Install plate onto adapter
Ensure you use Bolt, Washer, and Lock washer.
Category: Automotive