Miata Bluetooth Radio with Added Storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I don't do radio and play all media from my phone. I also want more storage in my car. This does both.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I stopped listening to radio years ago and started making my own playlists out of music I actually like. The radio in the Miata was being used as a glorified bluetooth speaker as a result.
On long drives I like to take my wallet and phone out of my pockets and right now the only good place to put them is in the glovebox or armrest cubby. Since they're then out of sight, this leads me to forget about them when I get to where I'm going, and having to do the 'walk of shame' back to the car once I realize my pockets are empty.
This print fits a ZK-1002L bluetooth amplifier that drives the car's door speakers, and also adds a second deeper pocket for my phone and wallet.
You will need to drill out the small holes for the amplifier board as I didn't trust them to print well enough to use out of the box.
The amplifier I used has just a set of stereo outputs, so if you have more than 2 speakers you'll need a different version.
The top pocket is sized for small phone and slim wallet enjoyers. Anything bigger than the "regular" sized Pixel and/or a 1/2" thick wallet might not fit. The bottom pocket is the same size as the phone one, just shallower so I don't have to go digging for my sunglasses in it.
Pictured part was printed out of Elegoo Rapid PETG using a 0.4mm nozzle on a Centauri Carbon with supports on the screw ears only. The included .3mf file has the print settings I used.