High Priestess
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Little something extra i did in blender this is one of many i made for a project i am working on.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 93
- Wydruki
- 0
- Wyświetlenia
- 391
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial
This is one of many model's/statues i have created in blender for a project i am working on. Uploaded here because i don't think it will be using this one in my project and someone might get some use out of it.
Although i did not 3D print this one the other 6 i have printed so far have come out fine on my Elegoo Centauri Carbon
I printed the others in both PLA and PETG PLA gave me a cleaner look for painting
0.4 nozzle
0.2 layer hight
0.42 line width
15% infill
I used tree supports on my others would recommend having them on bed only can be a pain clearing them off the model itself sometimes be careful with the sword too i had a problem with one not printing and snapping off on another model ended up redesigning so it was at an angle.
I resized the others in the slicer to 150mm but i am sure if you wanted too it would go smaller or larger.
Any problems give me shout and i will see if it can be fixed
Enjoy the Model the printing and painting if you wish to do so.